Hello Spoolers,
I figured I would compile a list of useful tools/files/resources for tuning the N54
Please Note!
All resources found here do not belong to SpoolStreet or myself. These files are here for informative purposes and using anything found here is meant to be used at your own risk.
JB4 MHD BEF Maps - 12/13/16
JB4 Mobile App Firmware - G5_ISO_32_5
MHD v1.50 - 01/04/17 (Mobile App)
JB4 MHD BEF Maps:
Download:
JB4 Firmware (Mobile App) - G5_ISO_32_5
Download:
JB4 Interface (PC Application)
Download:
N54 XDF Files for TunerPro:
Download:
N54 MHI Turbo Data:
Download:
bummerboost BEF Flash:
Download:
SPX Custom MHD Maps (Requires MHD + M-Boost):
Download:
I figured I would compile a list of useful tools/files/resources for tuning the N54
Please Note!
All resources found here do not belong to SpoolStreet or myself. These files are here for informative purposes and using anything found here is meant to be used at your own risk.
JB4 MHD BEF Maps - 12/13/16
Code:
1) Modified all E85 maps for 40% more cranking fuel during cold starts to reduce E85 hard starting in colder weather.
JB4 Mobile App Firmware - G5_ISO_32_5
Code:
1) Setup JB4 to automatically change itself to map0 if a flashing device is connected to the OBDII port. Upon switching to map0 it will flash the turn signal indicators to alert the user.
2) Added battery reset and register (when installing a new battery) under the menu 1/7 adaption resets.
JB4 Firmware Update
The latest firmware later REQUIRES JB4 INTERFACE DATED 3/1/15 OR NEWER AND SETTING CHANGES. All Duty Bias (formerly CPS) must be set to 0 or 50 to avoid 30FF under boost codes. 3rd gear boost limiting should also be set to 0 to disable. Menu4 in dash should be set to 3 for a factory flashed car or 2 for a back end flashed car. Failure to follow these directions will result in low boost and poor performance.*** Also note the new menu 12 range is 2000rpm to 3000rpm with a default of 2800rpm. Going too low on menu 12 may cause low throttle boost oscillation
MHD v1.50 - 01/04/17 (Mobile App)
Code:
- Added a "generate updated BIN" function in Stock map operations to export the proper and updated OEM map.
- Added 3 adaption resets: Intake Mass Flow, Load Control, Fuel High Pressure System.
JB4 MHD BEF Maps:
Download:
Code:
https://dl.dropboxusercontent.com/u/32095117/SpoolStreet/Tuning%20Resources/JB4%20BEF%2012.13.16/JB4_MHD_121316.zip
JB4 Firmware (Mobile App) - G5_ISO_32_5
Download:
Code:
https://dl.dropboxusercontent.com/u/32095117/SpoolStreet/Tuning%20Resources/JB4%20Software/G5_ISO_32_5.hex
JB4 Interface (PC Application)
Download:
Code:
JB4 Interface:
https://dl.dropboxusercontent.com/u/32095117/SpoolStreet/Tuning%20Resources/JB4%20Software/jb4_interface.zip
N54 XDF Files for TunerPro:
Download:
Code:
https://dl.dropboxusercontent.com/u/32095117/SpoolStreet/Tuning%20Resources/XDF%20Files/BMW-XDFs-master.zip
N54 MHI Turbo Data:
Download:
Code:
https://dl.dropboxusercontent.com/u/32095117/SpoolStreet/Tuning%20Resources/N54%20MHI%20Turbo%20Data.gif
bummerboost BEF Flash:
Download:
Code:
https://dl.dropboxusercontent.com/u/32095117/SpoolStreet/Tuning%20Resources/bummerboost%20BEF/bb_flash.zip
SPX Custom MHD Maps (Requires MHD + M-Boost):
Download:
Code:
https://dl.dropboxusercontent.com/u/32095117/SpoolStreet/Tuning%20Resources/SPX%20Custom%20MHD%20Maps/N54%20Bins%20-%20SPX%20Maps.zip