New profile posts

Hello Seb335i,

I am preparing an M57 and I am looking for rods, pistons, and forged valves. for the distribution chain, are there any reinforced ones?

Thank you in advance for your answer.
Seb335i
Seb335i
Take a look at Mahle Motorsport a german company
C
calya28
Thanks for your answer
C
calya28
I just looked, but I can't find a forged piston or connecting rod let alone valves for the M57
Hey there,
Saw an old post of yours, selling a M-Factory Diff? Do you still have it?

Thanks in advance,

Hugh
ShocknAwe
ShocknAwe
Sold it months ago. Sorry bud.
Thank you for your time and consideration I've built my 08 335i myself and am a member of N54 tech etc.. but am super new to all of this and in desperate need of some guidance with Tuning adjustments I have many thousands of$ tied up into this build and need some simple guidance please.
T.schofield
[email protected]
2158346347
S
Schof1014
This msg directed at Terry, please for the love of God or whatever your into contact me. I have thousands tied up in this build and am stuck. Running JB4/MHD backend stage 2+ with all BMS bolt on please help man.
2011 BMW 1M VO
Mods:
MHD Stage 2+
Axleback exhaust
CDV delete
Aftermarket clutch
BMC filter Z4 airbox cover
Any chance you're still parting out your car? I hope I'm not too late to this opportunity.. I'm entirely interested in getting those injectors!
Hello, when you have the time to reply I’m hoping you could help me out!

I will be running JB4; I want to start running meth, is the BMS one better just due to the integrity?
I’ve been looking on the BMS website, but I can’t seem to find a suitable tank for a 335 in the boot?

With JB4 and the meth kit, is it going to be relatively easy to have MHD as well,

thanks once again,
S
Schof1014
I know I'm not who you were hoping for but I have the BMS kit set up in my 08 335i and it works beautifully
S
Schof1014
Came with 2.5 gallon and ran simple Aluminum straps around twice on the left corner of boot, pump is where the spare tire would go and takes up all the space. Just FYI bro hope it helps you in some way✌🥂
Hi Terry, just a quick one, looking to use your N54 manifold with my existing PI spacer so I can run PI fuel and meth(to allow me to ditch CPM). Have you run it with a spacer? If so which way round works best? Meth in spacer or fuel?

Regards

Jason.
New member! I got an n54 07’335i
And I’m hoping you guys know about a rattle on the deceleration.. only on the startup when the engines warmed up it goes away.. I’m hoping it’s not the wastegate or valvetrain please reply if you know of this noise ty
  • 1Like
Reactions: doublespaces
07N54noob
07N54noob
Also I got money saved up for major upgrades if y’all can drop me some tips on what intake/exhaust/chip/ hpfp or alternative/injectors/ single turbo or what??what else should I do?? Accepting any advice thanks for your time!
doublespaces
doublespaces
Feel free to post a thread in the Troubleshooting section inside the N54 forum and someone should be able to check it out :)
Bmwfixerguy1
Bmwfixerguy1
Yes that noise you described on start up and on decel is most likely wastegate rattle. Very common and exactly how you described. Sorry bud definitely time for turbos 😔
(sorry this site wouldn't let me post the whole message in 1) ...If I hook it up to the car I still only get the same options and it doesn't seem to connect either, do I need to install on an XP or is there a download version for win10...thanks in advance
GeZZa
My issue is after I selected > "Transmission" , how do you know what type of gearbox to choose after this option ...I thought it would be ZF or GM or something similar, but instead i only get two options ..."GS8.xx" or "DXC" for gearbox types my car has the E83 engine with a "ZF 6HP21X" so I first chose "F7", then "transmission" but after that i am totally lost.
2008 X3 SE 2.0 SE auto (ZF-6HP21X) Hi. I was told your a bit of a guru when it comes to INPA etc, So hope full you can guide me in the right direction if you get the time I'd be greatfull, I installed and ran INPA on my win 10 Laptop ver 5.0.6 using WinXP Compatablilty on the installs within my home in order to familiarise myself with the menus.
Hi
Love your mods , you gave me som ideas what to do with mine full loaded 09 x5 d35.
The only thing that dont work on my car ( to my children sorrow ) are the rear seat dvd player . I sendt it to get fixed and was robbed for 450 USD for it and still dont work .
So my question are how much for the complete DVD kit ?
Regards from Norway
Morten
Top