is there a DIY for the Clutch Slave Cylinder?

  • Login or Register, members don't see Ads!
  • Tip: You can toggle the Dark Theme at the bottom of the page

Danksies

Corporal
Nov 2, 2016
180
NoVA
screw was stripped by previous owner a little and when i went to change out the clutch fluid i ended up fully stripping it. ill have to get a new cylinder anyways cause the screw is part of the unit. so i was wondering if anyone knew of a DIY? cant find anything for later gen cars, only e36/46 =/. it looks simple enough, i just want to know if i can save some work by not having to take off all the lines to get the to cylinder bolts lol
 

Danksies

Corporal
Nov 2, 2016
180
NoVA

doublespaces

Administrator
Oct 18, 2016
8,006
AZ
A lot of these people are probably having a shop install the clutch, and the shop does the cylinder for them also. Which is likely why there are no DIYs
 

V8bait

Sergeant
Nov 2, 2016
421
Texas
All slave replacements are virtually the same other than part numbers involved. There's nothing special about this car and there are many ways to do it depending on the tools you have available.
 
  • 1Like
Reactions: doublespaces

Joseph Soria

Lurker
Nov 6, 2016
13
California
You can go spend $120+ on a new slave, or you can buy a custom remote bleeder I sell for less.
And you will thank me later. I'll even throw in a DIY
 

doublespaces

Administrator
Oct 18, 2016
8,006
AZ
You can go spend $120+ on a new slave, or you can buy a custom remote bleeder I sell for less.
And you will thank me later. I'll even throw in a DIY
Why don't you make a DIY in the Resource section up top, and link to your bleeder that you sell. The resource section is designed for that, even can include a price. It will automatically create a discussion thread as well.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top