DCT read out Statistics Launch Control counter

pe7er

Lurker
Jul 26, 2018
15
2
0
Ride
335i
Hey guys, maybe someone has an idea ?!. I am not able to read out the Launch Control usage counter in german "Anzahl der Rennstarts" , neither via INPA nor with Tool32 using DKG_90.prg. All other parameters could be read like the current clutch pressure or the temperature of the transmission, but the function block "Statistikdatensatz_1_lesen" throws every time the error message: Edibas Error 19 : IFH-0009 no response from controlunit . it seems like there is a protection to prevent to read out the statistics data 1 .

2019-01-30_21h25_09.png
2019-02-02_14h07_38.png
 

pe7er

Lurker
Jul 26, 2018
15
2
0
Ride
335i
it's a e92 335i with N54 and DCT from 2009/04.
yes, it has launch control
HW-Nr: 7601968 and ZUSB: 7601973

as i said, other parameters can be read-out from the dct, but the statistikdaten 1 throws me that error
 

aus335iguy

Colonel
Nov 18, 2017
2,248
803
0
Down under
Ride
335i DCT 2009
it's a e92 335i with N54 and DCT from 2009/04.
yes, it has launch control
HW-Nr: 7601968 and ZUSB: 7601973

as i said, other parameters can be read-out from the dct, but the statistikdaten 1 throws me that error
Have you personally seen it being used on that car ?
 

RSL

Lieutenant
Aug 11, 2017
937
501
0
Might be M DCT only. Smokey burnout counter is in there too and that's M only. Non-M DCT Sport is program mode 1 and stays in 1 even in launch mode, but DKG shows 12 modes available. 1-6 are drive logic and 7-12 are launch control. Clear there are things in there not related/used on all DKG setups.
 

pe7er

Lurker
Jul 26, 2018
15
2
0
Ride
335i
got it :) , the solution was to buy the bimmergeeks cable and now works as expected !
I am glad to see the 0 as launch control counter value :D

2019-03-15_19h25_12.png
 
  • Like
Reactions: RSL

pe7er

Lurker
Jul 26, 2018
15
2
0
Ride
335i
in the right order:
- request gear without braking
- request rear gear @ v > rank threshold
- automatic P-Mode when leaving the car
- request P-Mode @ v > 5kmh (parking hook i guess)
- launch control counter
 
  • Informative
Reactions: aus335iguy

RSL

Lieutenant
Aug 11, 2017
937
501
0
Surprised this is cable related, but thanks for posting. I can't read any stats from any module and they seem to be the only things. Been using the one stop cable for 5 years without issue, but maybe I'll order BG and see if it reads them.

Reminder: put in Park, then open the door lol
 
  • Like
Reactions: aus335iguy

KClemente

Sergeant
Nov 26, 2019
284
147
0
Ride
E90 335i
Surprised this is cable related, but thanks for posting. I can't read any stats from any module and they seem to be the only things. Been using the one stop cable for 5 years without issue, but maybe I'll order BG and see if it reads them.

Reminder: put in Park, then open the door lol
Is there a way to read out the max rev counter? Ista isnt showing me anything of use.

Someone said on the 1 series forum "Maximum RPM Achieved is under service functions -> engine -> data -> RPM Limit. That will tell you everything in ISTA. " but it doesn't seem to be accessible for me
 

RSL

Lieutenant
Aug 11, 2017
937
501
0
I've never looked for it personally, but I might drag the laptop out to the car for some coding today, I'll poke around if I do.
 
  • Like
Reactions: aus335iguy